Junsi iCharger 406DUO

Specifications:
Net weight: 0.91kg
Dimension: 171×118×59 ±0.5mm
Input Voltage Range: 10.0—30.0VDC
Maximum Input Current Limit: <60A, CH1/2<47A Maximum Charge/Discharge Current: 70A in sync mode, 40A in async mode Maximum Charge Power Capacity: 1400W (Channel 1000W @input > 23.5V)
Maximum Discharge Power Capacity: 140W (Channel 80W)
Maximum Regenerative Discharge Power Capacity: 1400W (Channel 1000W)
Maximum Extra Discharge Power Capacity: 2000W (Channel 1000W @25V/40A)
Maximum Current Drain for Balancing: 2.4A in sync mode, 1.2A in async mode
USB Charging Port: 5V/1A(current-limiting protection 1.2A)

Charger Junsi iCharger 406DUO

Lilo/LiPo/Life/NiMH/NiCD DC Battery Charger (6S/40A/1400W)

2 Versions available

  1. Junsi iCharger 406DUO
  2. Charger with Power Supply 750W (Charger Stand offered)

Free shipping in USA.

Version:
Colors of Charger Stand

(more…)

Junsi iCharger 4010DUO

Specifications:
Input Voltage Range: 9.0—50.0VDC
Maximum Input Current Limit: <65A
Maximum Charge/Discharge Current: 70A@in sync mode / 40A in async mode
Maximum Charge Power Capacity: 2000W (Channel 1400W @input > 23.5V)
Maximum Discharge Power Capacity: 200W (Channel 130W)
Maximum Regenerative Discharge Power Capacity: 2000W (Channel 1400W)
Maximum Extra Discharge Power Capacity: 3200W (Channel 1600W @40V/40A)
Maximum Current Drain for Balancing: 2.4A in sync mode, 1.2A in async mode
Net Weight: 1.47kg
Dimension: 210.0×140.1×80.2mm ±0.5mm

Charger Junsi iCharger 4010DUO

Lilo/LiPo/Life/NiMH/NiCD DC Battery Charger (10S/40A/2000W)

2 Versions available

  1. Junsi iCharger 4010DUO
  2. Charger with Power Supply 750W (Charger Stand offered)

Free shipping in USA.


Version:
Colors of Charger Stand



(more…)

Charger Stand For iCharger 406DUO

Charger Stand For iCharger 406DUO

This Charger Stand was developed to allow you to mount a Junsi iCharger 406DUO chargers on top of your Power Supply. With our Charger Stand, no problem of balance. This charger stand is small, perfect for traveling.

* Power supply recommended Width 8.6in (218mm), Depth 3.5in (89mm)and  Height 1.5in  (38mm)
** Power supply shown for reference only. Power supply is not included with the charger stand.

Free shipping in USA.

*Power Supply isn’t included.

Charger Stand iCharger 406DUO

Charger Stand For iCharger 4010DUO

Charger Stand For iCharger 4010DUO

This Charger Stand was developed to allow you to mount a Junsi iCharger 4010DUO chargers on top of your Power Supply. With our Charger Stand, no problem of balance. This charger stand is small, perfect for traveling.

* Power supply recommended Width 8.6in (218mm), Depth 3.5in (89mm)and  Height 1.5in  (38mm)
** Power supply shown for reference only. Power supply is not included with the charger stand.

Free shipping in USA.


*Power Supply isn’t included.

Charger Stand iCharger 4010DUO

Charger Stand For iCharger 308DUO

Charger Stand For iCharger 308DUO

This Charger Stand was developed to allow you to mount a Junsi iCharger 308DUO chargers on top of your Power Supply. With our Charger Stand, no problem of balance. This charger stand is small, perfect for traveling.

* Power supply recommended Width 8.6in (218mm), Depth 3.5in (89mm)and  Height 1.5in  (38mm)
** Power supply shown for reference only. Power supply is not included with the charger stand.

Free shipping in USA.

*Power Supply isn’t included.

Charger Stand iCharger 308DUO

40 Amp Discharge Resistor Bank 2S

  • Resistor Bank for iCharger DUO
  • Discharge at 40A your lipos 1S to 2S
  • Does not heat up thanks to its box enclosure
  • Save room and time: no need for a resistor stand
  • Ready to use: plug easily to your iCharger
  • Clean and neat design with short wires
  • Optimize space with our charger stand
More information here. Free shipping in USA.

*Charger and power supply not included.

Resistor Bank for iCharger
Stand: